Menswear stone metal zip through woven fabric jacket TW59378
Fabric
| shell fabric |
100%cotton, 270gsm
|
| Body lining |
DTM 100% twill polyester
|
Trims
|
Trim
|
Position |
Quantity |
Size |
Color |
|
Zipper
|
CF, chest pkt, cuff |
5 |
#5 |
antique sliver |
|
Branded puller
|
CF, chest pkt, cuff |
5 |
|
antique sliver |
|
Branded popper
|
collar |
1 |
16mm |
antique sliver |
|
Branded ingot
|
above the LSW chest pkt |
1 |
1.5x0.9cm |
antique sliver |
Description
Front:
To have stand up collar of 5.5cm with twin needle stitching at the top and C/F edge.
To have a collar tab with v-tip and DH branded stud fastening as sample . Tab ti be 2.5cm wide x 8cm long and twin needle stitched all around.
To have zip through center front from bottom hem to top edge of stand up collar. Zip to be 5guage metal with Daniel Hechter branded zip puller.
Zip teeth to be exposed, but zip tape concealed with separate self piping on either side of C/F zip.
Center front to be twin needle stitched on either side of piping.
Shoulder detail:
To have slanted forward shoulder panels, twin needle stitched, shaped as sampe, and aligned with rounded panel piece at top of sleeve head as sample, also twin needle stitched.
Chest:
To have twin needle horizontal stitching 15.5cm below nsp across chest.
To have horizontal concealed zip pockets 1.5cm below chest stitching as sample with 5 guage l metal zips with separate self piping concealing zip tape. Only zip teeth to be exposed.
Pocket zips to be 13cm long with a self fabric separate conceal on outer edges of zips.
Chest zips to be 6cm away from center front.
Chest pockets to be concealed below chest wand only to have twin needle stitching as sample. Pocket dimensions: 15.5cm across x 16.5cm down.
To have a separate 5.5cm wide separate waistband with footstitching on top and bottom.
Sleeves:
To have long sleeves with separate5.5cm wide cuff footstitched on either side.
Back:
To have a C/B seam with footstitching on either side.
To have slanted shoulder panels with twin needle stitching as per front aligned with sleeve panel at top of sleeve head.
To have twin needle horizontal stitching detail 14cm below neck seam.
To have princess panel lines footstitched.
All top stitching to be in heavier thread and thread colour to match body colour.
Sleeves:
To have a back sleeve seam footstitched.
To have 2 x elbow darts, edge stitched on either side as per original.
Back of sleeve aligning with sleeve seam to have 15.5cm long sleeve zips to end of cuff with self fabric gusset as per sample.
Sleeve zips to have self fabric piping concealing zip tape. edge stitched as sample.
Gusset to be 6.5cm wide at bottom opening.
Inside:
To have Daniel Hechter branded piping in navy and white between lining and facing.
To have dtm poly twill lining throughout body and sleeves.
To have a self fabric portrait patch behind main label and size numeral.
To have navy/ white/ red ottoman tape running vertically from C/B neck seam to center of portrait patch, stitched down with matching thread and a 2cm long loop extending below portrait patch.
Tape width to be 1.5cm with equal parts navy, white and red stripes.
To have a LHSW inside welted pocket 14cm wide. Welt to be 2.5cm x 14cm. Pocket depth to be17cm.lined with poly twill lining.
Pocket welt to have a concealed stud fastening.
Measurement
| MEASUREMENTS |
Tolerances |
X-Small |
Small |
Medium |
Large |
X-Large |
XX-Larg |
| Collar Depth @ Centreback Neck |
0/0 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
| Collar Leading Edge |
0/0 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
5.5 |
| Collar measurement at top edge |
5/5 |
39 |
41 |
43 |
45 |
47 |
49 |
| Across Back Neck (HSP to HSP) |
5/5 |
16.4 |
17.2 |
18 |
18.8 |
19.6 |
20.4 |
| Neck Drop (seam to seam) |
5/5 |
7.7 |
8.1 |
8.5 |
8.9 |
9.3 |
9.7 |
| Across Front Mid-Armhole or Yoke |
5/5 |
40.6 |
42.8 |
45 |
47.6 |
50.2 |
52.8 |
| Across Back Mid-Armhole or Yoke |
5/5 |
38.6 |
40.8 |
43 |
45.6 |
48.2 |
50.8 |
| Half Chest at Underarm |
10/10 |
48 |
52 |
56 |
62 |
68 |
74 |
| Half Hem Width - Straight Across |
10/10 |
46 |
50 |
54 |
60 |
66 |
72 |
| Shoulder Seam ex Neck Trim |
5/5 |
13.4 |
14.2 |
15 |
15.8 |
16.6 |
17.4 |
| Sleeve Length (including Cuff) |
10/10 |
66.5 |
67.5 |
68.5 |
69.5 |
70.5 |
71.5 |
| Half Armhole (Diagonal) |
5/5 |
23 |
24 |
25 |
26.5 |
28 |
29.5 |
| Half Bicep at Underarm Pt |
5/5 |
19 |
20 |
21 |
22.5 |
24 |
25.5 |
| Half Cuff Width |
5/5 |
11.5 |
12 |
13 |
14 |
15 |
16 |
| Front Length (from HSP) |
10/10 |
68 |
70 |
72 |
74 |
76 |
78 |
| C/Back Length from Neck Seam |
10/10 |
66 |
68 |
70 |
72 |
74 |
76 |
Specification
1, High fashion,good quality, reasonable price,comfortble feeling and cost-effective.
2, Material : varous material,according to your requirements.
3, Color : according to your requirements.
4, Size : XS,S,M,L,XL,XXL,according to your requirements.
5, MOQ : 1000 pieces per style,Please give your order quantity,mix order also available.
6, Price : FOB Price depends on your order quantity.
Product Tags:
|
|
Mens Stone Color Woven Fabric Jacket With Metal Zip Through TW59378 Images
|
